> ## Documentation Index
> Fetch the complete documentation index at: https://docs.flexoworks.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Production files

> Review LEN and DXF uploads before applying them to production lines.

Use a job's **Files** section to upload artwork and drawings, inspect metadata,
and review specifications extracted from LEN/LENX and DXF files. Production
lines change only when you apply the review.

## Upload and find files

Select **Upload files**, or drop files onto the Files card. One request accepts
up to 30 files, 250 MB per file, and 1,000 MB in total. Wait for the upload and
analysis to finish.

The **All**, **Images**, **PDF**, **LEN**, **DXF**, and **Others** tabs show active
attachments. Expand a file's metadata to inspect available dimensions and
production information. PDF metadata is reference information; uploading a
PDF does not automatically create a production line.

![English job Files card with LEN files, type tabs, and Review production files](https://mintcdn.com/flexoworks/mQ-upAWnU4Vp715W/images/production-update/production-files.png?fit=max\&auto=format\&n=mQ-upAWnU4Vp715W\&q=85\&s=7d025368a12cb03840ca4578c47e1344)

Files remain available independently of the production lines created from them.

## Review LEN specifications

Review is available in **Intake** and **Prepress**. A LEN/DXF upload opens the
review when there are pending files. Choose **Review later** to defer it, then
reopen **Review production files** from Files.

1. Check filenames, order number, colour, and warnings.
2. Choose **Apply to production line**: create a new line or select the existing
   line you intend to update. Compare its **Current values** before replacing them.
3. Check **Width (mm)**, **Height (mm)**, **Quantity**, **Material**,
   **Thickness (mm)**, **Technology**, and **PixelBoost**.
4. Keep only the intended rows checked and select **Apply selected changes**.

![English LEN review with production-line destination, dimensions, material, and repeat requirements](https://mintcdn.com/flexoworks/mQ-upAWnU4Vp715W/images/production-update/len-review.png?fit=max\&auto=format\&n=mQ-upAWnU4Vp715W\&q=85\&s=f9fd8346fd6ac8c2e16c404763e65455)

Review the source files, destination, and proposed specifications before applying changes.

Dimensions round to whole millimetres. Compatible files from the same order
can share a row, including rotated dimensions. The file count proposes the
quantity; check it against the work required. One linked LEN can supply several
identical physical plates. Uploading the same file again is not how to request repeats.

Recognized filename material codes match active materials by exact **Internal
label**, ignoring letter case. For example, `R7` must match that label, not part
of a longer name. Check technology and PixelBoost rather than assuming every
filename follows the same convention.

Applying changes updates the selected lines and their billing. Uploading alone
does neither and does not send the prepress review email. Changing production
data also reopens a pending manager review.

## Review a DXF apron

Each DXF proposes one **Apron** row for its colour, initially with quantity 1.
The number of plate pieces inside the drawing is not the apron quantity.
Check width and height, choose **Base material** and **Cushion material**, and
select a new or existing mounting-carrier line before applying.

![English DXF apron review with dimensions, quantity, base material, and cushion material](https://mintcdn.com/flexoworks/mQ-upAWnU4Vp715W/images/production-update/dxf-review.png?fit=max\&auto=format\&n=mQ-upAWnU4Vp715W\&q=85\&s=79b475db7add5ba3535ead459b50ee10)

Confirm the apron dimensions and choose both mounting materials.

Automatic dimensions come from one closed rectangular outline enclosing the
drawing. Unsupported geometry or units, an unclear outline, or unreadable
sizes require approved dimensions entered manually. No polymer-thickness
allowance is added automatically.

## Set repeat requirements

Expand **Repeat production** in LEN review or when editing a plate line:

* **Required CDI** fixes the machine at the job's production location.
* **Required rotation** fixes the original orientation or 90° clockwise.

Leave values flexible unless they must match earlier production. The lock icon
explains a fixed requirement. These settings constrain later arrangement; they
do not record actual completion. DXF apron lines do not use these requirements.

## Resolve warnings

| What prevents applying | What to do |
| - | - |
| Missing dimensions, material, thickness, or technology | Complete the required fields from approved production information. |
| Different order numbers selected | Apply files for one order at a time. |
| Unrecognized order number | Review that file on its own. |
| Duplicate upload | Use the original file; renaming identical contents does not make new artwork. |
| Two rows targeting the same line | Choose a distinct destination for each selected row. |
| An existing line changed during review | Reload the job and review current values before retrying. |

Applied files retain their metadata and an applied notice. They are no longer
pending review. Confirm quantities, source files, and lines before
[Prepress review](https://docs.flexoworks.com/guides/prepress-review.md).

## Archive obsolete files

Use **Archive** when a file should no longer be a production input. **Show
archived** opens separate, download-only history. Archived files do not count
in active tabs, order conversion, or job duplication. There is no restore action.

Archiving a file does not remove its already-created production line. Check
the line and source before approval. If a file is in use and the action is
blocked, resolve the production state first.

## Related guides

* [Orders and jobs](https://docs.flexoworks.com/guides/orders-and-jobs.md)
* [Production lines](https://docs.flexoworks.com/guides/production-lines.md)
* [Prepress review](https://docs.flexoworks.com/guides/prepress-review.md)
* [CDI workspace](https://docs.flexoworks.com/guides/cdi-workspace.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.